(Summary description)>The bottom plate must be polished and painted first: AD has a lot of hollowed out effects. If the bottom plate is not processed in advance, the position after the hollowed out will not be processed after the product is fixed.
>Avoid the problem of chromatic aberration: After positioning the product before installation, spray the primer on the shape position where the carved barb hook is turned, and then proceed to the installation step after it is dry.
>Spray a thin layer: it is not required to spray quickly and spray very thick at one time, which will cover the lines and details of the product, and spray a thin layer on the top, bottom, left, and right sides
>Overlapping or bridging process: If the arc is slightly larger, the unnatural arc is generated when the arc is directly bent, you can use a hot air gun to directly heat the product to increase the softness of the product
>Different products: Some product models will be hollowed out due to size and weight. If you need to cut and use, please pay attention to the hollowness of the cut surface.
The weight of a single product may be too heavy. Please pay attention to our weight reminder. When using this product, it is recommended to plan a fixed plan to strengthen the installation in advance

• Categories:FAQ
• Author:
• Origin:
• Time of issue:2021-04-21 15:49
• Views: