National Service Hotline

19575435127

Your current location：
Homepage
/
FAQ
/
FRP Fiber Glass Reinforced Plastic

FAQ

Check category

Q&A

Faqs help you quickly solve technical problems.

For further coordination, please Contact us。

What is FRP? 2021-04-21 15:40:00
High-strength glass fiber (Fiberglass Reinforced Plastic), referred to as FRP. FRP is composed of glass fiber and base material. Generally, the base material is unsaturated polyester, epoxy resin and phenolic resin, and E-grade glass fiber or its products are used as reinforcement materials. Resin-based cement has good stability, weather resistance and high compressive strength; adding anti-alkali glass fiber can significantly improve and strengthen its shortcomings. FRP unit is light in weight, easy to cut, process, transport and install, so it is widely used in various shapes, containers, structural materials, architectural exteriors, landscape modeling, etc.
What is the scope of application of FRP? 2021-04-21 15:40:00
Why choose FRP? 2021-04-21 15:41:00
>Slip-resistant and wear-resistant: with non-slip texture, one of the highest anti-slip degrees measured on walking surfaces >Durability: anti-corrosion and anti-rust, suitable for permanent indoor and outdoor use >The light transmittance is more than 85%: similar to glass but not easy to break, can achieve the purpose of simplifying the lighting design and reducing the project cost >Heat insulation and sound insulation: the specially designed interlayer finish can achieve the double-layer effect of both sound insulation and heat insulation >Customized service: no matter how complex shapes and patterns are designed, we can make them
What paint is sprayed on the top coat of FRP products? 2021-04-21 15:41:00
The main components of the surface spray paint of FRP glass fiber reinforced plastic products are made of mixed values and auxiliary pigments. It is a volatile paint, the paint film dries quickly, has good anti-corrosion performance, and is convenient for construction. And it has good moisture resistance, chemical gas resistance and salt spray resistance, substrate degreasing and dust removal, special primer spraying for glass fiber reinforced plastic substrate, adding thinner and spraying according to the ratio of 4:1.
How to deal with FRP product interface? 2021-04-21 15:41:00
Putty is mainly composed of a two-component filling material composed of a main body ash and a curing agent formed by mixing and grinding unsaturated resin, talcum powder, styrene and other materials. It has a normal temperature curing and drying speed, strong adhesion, and easy to polish. Features. It is mainly used to fill and modify defects such as pits, shrinkage holes, and cracks in FRP sculptures to meet the leveling and smoothness of the substrate surface before finishing. It is widely used in molds, FRP and other fields.
How to hang large area and heavier FRP products? 2021-04-21 15:41:00
How to clean FRP sculptures? 2021-04-21 15:42:00
Previous page
1

Contact Us

1

微信

Scan to add Wechat

QQ

CN QQ

HK QQ

QQ

97668614

Business Department One
Email：2386989654@qq.com
Tel：15018996207

Business Department Two
Email：1379367120@qq.com
Tel：13923887405

Business Department Three

WhatsApp： +852 91805127

Technical Advisory Service
Email：3168974186@qq.com
Tel：13392641203

Links

 

Copyright © 2023 Shenzhen Longgang Hongjun Decoration Materials Co.Record No：粤ICP备2023123700号 All Rights Reserved.

SEO Powered by www.300.cn

置顶